Living in a tropical country like the Philippines means experiencing lots and lots of rain that a waterproofed home is basically an essential. Give your exterior walls protection from water seepage to help prevent problems like leaks. You can achieve this through Boysen Plexibond, a cementitious waterproofing system which would leave a water-resistant film for your walls. Here is a full, digestible guide for when you want to use this product for your homes.
Starting from Bare Concrete
First things first, know that Boysen Plexibond is a product applied to bare concrete.
What if I want to apply Boysen Plexibond on an already painted surface?
Then, you would have to scrape existing paint off the surface. Applying Boysen Plexibond on painted surfaces can affect its adherence.
The second thing you need to know is that you cannot use Boysen Plexibond on its own. The material you will be applying on walls to become the watertight coating is Boysen Plexibond mixed with Portland cement.
How to Prepare the Material
Mix cement with the liquid Plexibond in a separate container. For every 4 liters of Boysen Plexibond, add at least 6.5 kilograms up to 7.5 kilograms of cement. Add the cement in intervals. While doing so, continuously stir to avoid lumping. Don’t add too much or too little of the cement in order to get a uniform texture.

Afterwards, let the mixture pass through a fine sieve to remove any lumps. Stir as often as possible to avoid settling. The resulting mixture should have paint-like consistency and a pot life of 2 hours.
When making this waterproofing mixture, do not add anything such as paint or sediments.
Applying Boysen Plexibond
For walls, apply 2–3 coats of the Boysen Plexibond mixture. You can use a brush or a roller to do this. Using a textured roller, like with an orange peel texture, can impart a textured look.

Correcting Surface Imperfections
A common concern for Boysen Plexibond users is what to do when imperfections like hairline cracks have occurred. Can skimcoat be applied on top of Boysen Plexibond?
No, you cannot.
What you can do is use a compatible skimcoat BEFORE waterproofing using Plexibond. One of your top options is Konstrukt Permaplast K-201 High Performance Acrylic Skimcoat which addresses cracks up 2 mm to 3 mm in size. It has an acrylic formulation similar to Plexibond’s which makes the two compatible. For larger cracks, you would have to use an acrlyic render. Avoid using other types of skimcoat, especially powdered skimcoats, before applying Boysen Plexibond. Consult with the manufacturer regarding its compatibility of the skimcoat to Boysen Plexibond.
You can also use Boysen Plexibond to fill in cracks before applying the Plexibond mixture for waterproofing. Add 3 parts by volume of fine, uniform-sized sand to 1-part cement and mix with Plexibond to a thick consistency. Use a trowel to apply this on cracks.
If you need to correct imperfections AFTER applying a waterproofing layer of Boysen Plexibond, wait for at least one day before the last coat has cured. Then, apply a primer, what to use would depend on your chosen topcoat. If you would use Boysen Acrytex, for example, you would prime with Boysen Acrytex Primer.
Once the primer has dried, use Boysen Acrytex Cast to correct imperfections up to 1 mm in size. Its watertight putty, resistant to the elements, is perfect for exterior walls. After the putty has dried, spot prime where the putty is placed with the same primer you used. Boysen Acrytex Cast is also compatible with water-based topcoats.
Paint Topcoats for Waterproofed Walls
The waterproofing system of Boysen Plexibond is finished after the application of a paint topcoat. People ask if you can paint over the Plexibond film. It’s not just that you can, you should! It will give the Plexibond layer additional protection against UV. We’ve mentioned about the Boysen Acrytex system which you can use with Boysen Plexibond, but here are water-based options you can consider.
Boysen Permacoat Latex
A trusty reliable product for exteriors, Boysen Permacoat Latex could be your go-to paint for beautiful exteriors. Its main claim to fame is its hiding which allows you to have clean finishes. It is also very durable. It is available in flat and semi-gloss finishes. Different colors can be mixed in a Boysen Mix & Match Color Station.

Titan Superflex Elastomeric Paint
The other product you can consider is Titan Superflex Elastomeric Paint. It’s an economical side-grade for exterior walls whose main feature is its flexible finish. Meaning, it can bridge hairline cracks that can occur on walls. It’s also self-priming and provides a finish that’s good for all kinds of weather!

Using Boysen Plexibond to Waterproof Your Walls
This full guide should be helpful in knowing which products to use when waterproofing the walls against rain and water. You can also use this for the walls in indoor spaces such as bathrooms where you want to eliminate water seepage as much as possible.
Check this article for some frequently asked questions.
If you would also like, a call with our technical team may be useful for you. They would be happy to give you advice on how you waterproof your homes with Boysen Plexibond. Call (02) 8363-9738 local 413 to 418 during office hours for one-on-one consultations. You can also send inquiries to [email protected] if you wish.
Subscribe to the blog for painting and home improvement guides.