Sometimes a clear coating is what you need. We often answer inquiries about Boysen’s lineup of clear coat products. If you too are unsure when to use one and which product to use, this quick guide will be useful.
As a Barrier Against Dampness for Concrete
Moisture on your concrete surface can cause paint problems down the line. Blistering and peeling paint are prime examples of what can happen when there is excessive moisture on your room walls. Prevention is key.
Boysen Acrylic Emulsion is a water-based, acrylic coating used on interior concrete surfaces and acts as a sealer so that the moisture from the concrete will not seep through and damage your paint. It is applied after the primer and before the topcoat. If you’re putting up wallpaper, you can protect it from moisture by applying Boysen Clear Acrylic Emulsion beforehand as well.
To Protect Brick, Natural Stone, and Masonry
Brick, natural stone, and masonry walls at home need excellent protection to keep them pristine for as long as possible. Adding a glossy topcoat also adds an attractive shine and radiance to the surface. If you prefer a matte finish, Boysen has a product for that too.
Boysen Acrytex Clear Coat is an acrylic solvent-based interior and exterior coating used as a clear coat protection for bricks, natural stone, masonry, and wooden surfaces. It has a glossy shine and can also be used over faux cement finishes such as those in the Konstrukt Lunar series. Remember to apply Acrytex Sealer first then Acrytex Clear Coat after.
Boysen Aquaseal is a silicone-based penetrating sealer and topcoat designed to provide protection and maximum water repellency to interior and exterior brick, natural stone, and masonry surfaces. It has a matte finish and is applied on bare surfaces.
As a Topcoat for Decorative Finishes
When you’ve already worked hard to make your walls attractive, like when you’ve chosen a decorative finish or faux cement walls, make sure it stays that way. Enlist the help of clear topcoats.
Boysen Matte Shield is an acrylic water-based coating that is applied as a topcoat over interior painted surfaces. It’s clear, matte finish acts as a protection against household stains. Its primary use is for maintaining the clean and elegant look of specialty decorative finishes like Boysen DECORe and faux cement finishes like those in the Konstrukt Lunar series.
To Seal and Protect Wood
Scratched up floors and furniture isn’t a good look. A sealer and topcoat combo gives wood a protective barrier against normal wear and tear. It also prevents discoloration and staining caused by water and moisture.
Hudson Timbercoat is a 2-in-1 sealer and topcoat that provides clear protection to wooden floors, furniture, cabinets, doors, panels, and other wooden surfaces. Use it on its own or after a wood stain for both interior and exterior surfaces.
It comes in three different finishes—gloss, semi-gloss, and matte—giving you more options for the sheen you prefer. It’s water-based too so, unlike solvent-based sealers, it only gives off a mild odor.
If you have any questions or inquiries about Boysen products, our technical team will be happy to assist you. Send an email to ask@myboysen.com or call (02) 8363-9738 local 413 to 418 during office hours for a one-on-one consultation.
